|
Generally, a building inspection is a comprehensive investigation
of a home to find out if there are any defects. While an appraisal
would reveal the value of a home, the building inspection goes much
more in depth to reveal potential problems with any facet. A building
inspector generally would look at the following areas:
Electrical - Check receptacles in
all rooms for proper grounding and the five most probable wiring
defects, and note the hazards found.
Roof - visual inspection of roof
covering condition and defects. Inspect skylights, flashings, gutters,
chimney shaft and damper operation. Inspect chimney spark arrestor,
cap and hood.
Attic - check accessible underside
of roof covering for water penetration, visible wiring hazards,
ventilation, insulation and skylight chutes.
Water Penetration - check all interior
ceilings, walls and baseboards. Plumbing - shower, bathtub and sink
drains, commodes and components, hot and cold water plumbing, tiles,
grouting, water penetration and faucet operation.
Air Conditioning - check all central
A/C systems and wall units for function and operation; check all
supply and return vents for correct operation. Checking of wall
or window units are usually not part of the inspection.
Heating System - check all central
heating systems and wall units for function and operation; check
all supply and return vents for correct operation.
Appliances - thoroughly check each
built-in appliance for component operation, proper electrical grounding,
major defects in operation and control. Although checking of appliances
is not required by the American Society of Home Inspectors (ASHI),
many inspectors will include appliances. However, proper electrical
grounding is not checked if the outlet is not accessible.
Hot Water Heater - inspect for lower
cabinet leaks and signs of rust. Swimming Pool/Spa - filter and
circulation pump, surface plumbing leaks, sweep, pump, ladder, diving
board, lighting and gauges. (Usually, not done by home inspectors,
but by swimming pool specialists.)
Sprinkler Systems - Check sprinkler
heads and pump operation.
Security Systems - This is not included
in the home inspection.
Docks, Davits and Seawalls - These
items may or may not be included in the inspection and the inspector
will check for defects only, not for structural integrity.
The cost of a building inspection varies
depending on the square footage and amenities and not on the sales
price of the property. This inspection is based on the professionalism
of the individual inspector and may vary from one representative
to the next. You should call the inspector to confirm exactly what
he will be checking during inspection. The protection you gain from
a building inspection is merely another layer of support that can
prevent you from making a mistake when purchasing real estate. Information
herein deemed reliable but not guaranteed.
|